 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SIL30 Series DC/DC CONVERTERS Single output 1 NEW Product 30A Non-Isolated DC/DC Converters * Wide trim range (2.5V to 5.0V) * Horizontal and vertical models available * High power density design means reduced board space requirement * Remote sense * Power good output signal (open collector) * Operating ambient temperature up to +80C with suitable derating and forced air cooling * Remote ON/OFF (active high) * Over-temperature protection * Over-current and short-circuit protection * Optional current share The SIL30 Series is a new high density open-frame non-isolated converter for space sensitive applications. The converter has a wide input range (10.2 to 13.8Vdc) and offers a wide 2.5 to 5V output voltage range with a 30A load. The series offers remote ON/OFF, over-temperature protection and over-current protection as standard. Its current share facility supports parallel operation of multiple SIL30 units and the remote sense feature enables the SIL30 compensate for voltage drops between the converters output and the load. With full international safety approvals including EN60950 and UL/cUL60950 the SIL30 reduces compliance costs and time to market. All specifications are typical at nominal input, full load at 25C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability (See Note 1) 2.5V to 5.0V 2.5% 0.2% max. 1.0% max. 0A/30A At turn-on At turn-off (See Note 2) Deviation 4.0% max. 100mV max. INPUT SPECIFICATIONS Contd. Turn ON threshold Turn OFF threshold GENERAL SPECIFICATIONS Efficiency Switching frequency Approvals and standards (See Note 7) Material flammability Fixed 91% 300kHz TUV Product Service IEC60950, UL/cUL60950 UL94V-0 28.3g (1oz) MIL-HDBK-217F 129,390 hours 12V model @ 40C 100% load, ground benign Bellcore 332 3,994,753 hours 9.0V 8.3V Output setpoint accuracy Using 1.0% trim resistors Line regulation Load regulation Min/max load Overshoot Undershoot Ripple and noise 5Hz to 20MHz Transient response (See Note 3) Current share INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 5) Power up Remote ON/OFF Nominal 12V No load Remote OFF (See Note 4) (See Note 2) Low line to high line Full load to min. load 50mV pk-pk 15mV rms 75mV 150s recovery to within regulation band 10% Weight MTBF Representative model: Full load ENVIRONMENTAL SPECIFICATIONS 10.2 to 13.8VDC 230mA 30mA 13.8A max. @ Io max. and Vin = 10.8V 150mA (pk-pk) Logic high >2.4VDC <0.8VDC <6ms <6ms Thermal performance (See Note 8) Altitude derating (above sea level) Operating ambient, temperature Non-operating 3,000m (9,843 ft) 10,000m (32,808 ft) 0C to +80C -40C to +125C 20% 50% File Name: SIL30.PDF Rev: 19 Sept 2002 SIL30 Series DC/DC CONVERTERS OUTPUT POWER (MAX.) 150W Notes INPUT VOLTAGE 10.2-13.8VDC OVP N/A OUTPUT VOLTAGE 2.5V Single output 2 NEW Product 30A Non-Isolated DC/DC Converters For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT (MIN.) 0A OUTPUT CURRENT (MAX.) 30A EFFICIENCY (TYP.) 91% REGULATION LINE 0.2% LOAD 1.0% MODEL NUMBER (10) SIL30-12SADJ-V PROTECTION Short-circuit protection Over-temperature protection RECOMMENDED SYSTEM CAPACITANCE Input capacitance (See Note 9) Output capacitance (See Note 9) 270F/20m esr max. 2 x 680F/10m esr max. Foldback, non-latching Hiccup, non-latching Uses external resistor from TRIM to output ground. Minimum value 1.9k. See Application Note 132 for details. 2 Measured with external filter. See Application Note 132 for details. 3 di/dt = 10A/s, Vin = Nom, Tc = 25C, load change = 0.5 lo max tp 0.75 lo max and 0.75 lo max to 0.5 lo max. 4 External input fusing is recommended. 5 Power up is the time from application of DC input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. 6 Signal line assumed <3m. 7 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8 See Application Note 132 for operation above 50C. 9 See Application Note 132 for ripple current requirements. 10 The standard unit with the suffix '-V' is for vertical mounting. To order a unit with horizontal mounting, please add the suffix '-H' to the model number, e.g. SIL30-12SADJ-H. 1 CAUTION: High internal temperatures. Ensure that unit is not user accessible. PIN CONNECTIONS PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 FUNCTION TRIM No Pin Ground Power Good Not Connected Current Share Ground Ground Remote ON/OFF Remote sense (GND) Remote sense (O/P) Vin PIN NO. 13 14 15 16 17 18 19 20 21 22 23 24 FUNCTION Vin Vin Vout Vout Ground Vout Ground Vout Ground Vout Ground Vout International Safety Standard Approvals (pending) TUV Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: SIL30.PDF Rev: 19 Sept 2002 SIL30 Series DC/DC CONVERTERS Single output 3 NEW Product 30A Non-Isolated DC/DC Converters For the most current data and application support visit www.artesyn.com/powergroup/products.htm 0.150 (3.82) 0.120 (3.05) 0.470 (11.94) All dimensions in INCHES (mm) General tolerance 0.01in (0.25mm) except where specified otherwise 0.050 (1.27) Ref. 1.250 (31.75 1.350 (34.36) 1.240 (31.40) 0.050 (1.27) 0.100 (2.54) Typ. 2.300 (58.42) 2.400 (60.96) 0.150 (3.81) Ref. 0.212 (5.38) 0.120 (3.05) 1.200 (30.48) 0.290 (7.46) 0.090 (2.29) Pin 1 Figure 1: Mechanical Drawing - Horizontal Mount Version 0.500 0.020 (12.80 0.50) 0.080 0.020 (1.90 0.50) All dimensions in inches (mm) General tolerance 0.01in (0.25mm) except where specified otherwise 0.062 (1.57) Ref 2.400 (60.96) 1.250 (31.75) 0.140 (3.56) 0.050 (1.27) 0.025 (0.64) Typ 2.300 (58.42) Pin 1 0.050 (1.27) Typ 0.025 (0.64) Typ 0.260 0.030 (6.59 0.76) 1.200 (30.48) 0.140 (3.56) 0.090 (2.29) 0.250 (6.35) Figure 2: Mechanical Drawing - Vertical Mount Version Data Sheet (c) Artesyn Technologies(R) 2002 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: SIL30.PDF Rev: 19 Sept 2002 |
Price & Availability of SIL30
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |